Webbing Sling Pigment Continuous Dyeing Machine
A webbing sling is not dyed like a ribbon. It is heavy, it runs under tension, and the finished length has to stay within the elongation your sling design allows. If the line pulls too hard, or the shade changes from one section to the next, the problem shows up after the sling is cut—not on the dye line.
This is a complete continuous pigment dyeing line for webbing slings, heavy webbing, lashing webbing and lifting slings. It runs from feed-in to take-off in one line: dyeing tank, IR drying chamber, hold mangle, color fixation chamber, post mangle, and take-off device.
It is available in 200 mm, 400 mm, and 600 mm working widths. The number of straps per run is not fixed; it depends on the webbing width, spacing and your daily output. We configure the line around your product mix.
What It Dyes
The line is used for:
- Webbing slings
- Heavy webbing
- Lashing webbing
- Lifting slings
It is a continuous pigment dyeing line, not a piece-dyeing or batch dyeing machine.
Complete Line from Feed-In to Take-Off
The process runs in one continuous line:
1. Feed-in
2. Dyeing tank
3. IR drying chamber
4. Front Hold mangle
5. Color fixation chamber
6. Post-hold mangle
7. Take-off device
There is no washing tank in this line. It is a pigment dyeing line from feed-in to take-off, not a wet-dye line with a washing stage.
The color fixation chamber opens for cleaning, which makes routine maintenance easier and helps keep the working area clean.
Elongation Control for Load-Bearing Webbing
Webbing slings are load-bearing products. If the line pulls the webbing without control, the finished elongation can move outside the target for the sling.
This line includes elongation control. Tension is managed through the hold mangle, color fixation chamber, and post mangle so the finished webbing stays closer to your target elongation. The exact setting is confirmed with your webbing and sling specification.
Working Width and Number of Straps
The line is available in:
- 200 mm working width
- 400 mm working width
- 600 mm working width
The number of straps per run depends on the webbing width, the spacing between straps and your required daily output. We do not quote a fixed number of straps for every customer; the line is configured after we know your product mix.
Maximum speed is 0–15 m per strap per minute. Actual running speed depends on webbing width, shade, dye pickup and drying.
Pigment Dyeing, No Washing Tank
This is a pigment dyeing line. The process goes from the dyeing tank through IR drying and color fixation to take-off, without a washing tank.
That keeps the line focused on pigment dyeing. If your process requires washing or a different wet-finishing stage, discuss it with us before the line is configured. Color-fastness testing is not part of the standard scope; if your buyer requires a specific test, confirm it before ordering.
Heating, Mixer and Stainless Steel Construction
The line can be heated by:
- Gas
- Electricity
- Gas plus electricity
The mixer is available from 100 kg to 500 kg, depending on your batch size and production requirements.
The machine is built in stainless steel for corrosion resistance and easier cleaning. The color fixation chamber opens for cleaning, and the line is laid out for routine maintenance access.
Specifications
- Working width: 200 / 400 / 600 mm
- Number of straps per run: configured by webbing width and daily output
- Maximum speed: 0–15 m per strap per minute
- Process: feed-in → dyeing tank → IR drying chamber → hold mangle → color fixation chamber → post mangle → take-off device
- Elongation control: Yes
- Washing tank: No
- Heating: gas/electricity/gas plus electricity
- Mixer: 100–500 kg
- Construction: stainless steel
- Warranty: 1 year
- Certification: CE
- Installation: free on-site installation and operator training
Final line configuration, power supply, dimensions, and weight are confirmed with the quotation. The line is built around the working width, number of straps, and output you need.
Who It Is For
This line is for webbing sling producers, lifting sling manufacturers, and factories that dye heavy webbing or lashing webbing in a continuous pigment process.
It is also suitable for factories that want one complete line from feed-in to take-off, without a separate washing stage.
It is not a batch dyeing machine, and it is not a washing line. If your process requires washing or a different finishing stage, tell us before the line is configured.
Warranty, CE and Installation
The line comes with a 1-year warranty and CE certification. Free on-site installation and operator training are included.
Online support is available for daily operation and technical questions.
Frequently Asked Questions
Q: Is this a complete continuous dyeing line?
A: Yes. It runs from feed-in to take-off: dyeing tank, IR drying chamber, hold mangle, color fixation chamber, post mangle and take-off device.
Q: What working widths are available?
A: 200 mm, 400 mm and 600 mm.
Q: How many straps can it dye at once?
A: The number depends on the webbing width, spacing, and your daily output. The line is configured after we know your product mix.
Q: Does it have elongation control?
A: Yes. Tension is managed through the hold mangle, color fixation chamber, and post mangle to help keep finished elongation within your target.
Q: Is there a washing tank?
A: No. This is a pigment dyeing line from feed-in to take-off, without a washing tank.
Q: What materials does it dye?
A: Webbing slings, heavy webbing, lashing webbing, and lifting slings. Send a sample if your webbing is not listed.
Q: What is the maximum speed?
A: 0–15 m per strap per minute. Actual speed depends on width, shade, dye pickup, and drying.
Q: What heating options are available?
A: Gas, electricity, or gas plus electricity.
Q: What mixer size is available?
A: 100 kg to 500 kg, depending on batch size and output.
Q: Is color fastness tested on this line?
A: Color-fastness testing is not part of the standard scope. This is a pigment dyeing line; if your buyer requires a specific test, confirm it before ordering.
Q: What is the power supply and line size?
A: Power supply, dimensions, and weight are confirmed with the final configuration. They depend on working width, number of straps, heating, and mixer size.
Q: Is installation included?
A: Yes. Free on-site installation and operator training are included, along with online support.
Q: What is the warranty?
A: One-year warranty, CE certified.
Q: Can the line be customized?
A: Yes. Working width, number of straps, heating, and mixer size are configured around your webbing and output.
Send Your Webbing Sample
Send your webbing width, daily output, and the number of straps you need to run. We will confirm the working width, line layout, heating, and mixer size for your application.
Related Dyeing & Webbing Machines
